A lean thinker will always continue to push on boundaries whether it be around processes or how things are viewed. It isn’t an easy road to continually be pushing against the normal thought pattern but when it works out it is very rewarding. One big breakthrough makes up for many failed breakthroughs.
The automotive supplier I worked for specialized in plastic trim parts. The parts had three finishes: molded in the color, painted or chrome. The facility had 30 injection molding presses ranging from 500 ton to 3500 ton. In order to reduce inventory and shorter our lead time we had the hair-brained idea to actually connect four molding presses to the chrome plating line. It was hair brained for two reasons: 1) we needed to moved 1800 ton presses and they weren’t easy to move and 2) the chrome plating line racks were 10 ft x 15 ft so a pit would have to dug in the concrete next to the molding press so rack could be lowered to where operators could load the top of the rack.
Studies on paper showed the molding cycles and changeover times lined up nicely with our rack storage capacity for the plating line as it was. The savings was in the neighborhood of $250,000 or more per year in inventory, lead time and labor. The VP would not sign-off. He just couldn’t picture it.
Fortunately, the plant manager wouldn’t drop it. So, I got approval to purchase a computer simulation package I had a history with and model the before and after states of the areas. It took about three months to get refreshed with the program language and then create the base models. We then spent another couple of months tweaking and playing with scenarios. This allowed for a better estimate of the savings and to help visualize how the facility would work.
We were able to present the idea again to the VP and he started to see and move on his original opinion. It took a few weeks of the plant manager following up with the VP before he finally gave his consent.
From original idea to breaking ground was about a year. When it was done it worked very well. We reduced the lead time about about a week, freed up employees to work in areas where we had temporary help and saved approximately 20,000 sq. ft. of space.
Nothing like this had been done before and even people in the facility said it would never work. When it did it opened up the possibilities for so much more.
Unfortunately, I wasn’t there to see the “more” because I left and took a position at another company.
* It can be hard and frustrating to not be able to get others to see the potential and just continue so squash ideas, but if you have just one or two of the right believers it can make all the difference in the world. For me, that was the plant manager in this case.
* Sometimes you have to be creative to get people to change their views. You have to provide them with new positive experiences. For the VP, we couldn’t spend the large about of money to just do it and show him. We had to come up with a different way. That was the computer modeling. It allowed him to see things and ask questions to have a good experience in the new world. For the plant staff and employees, it was seeing the new idea actually come to life and work.
* I learned how to be stubborn with my beliefs but to do it a positive manner and how to back up, regroup and take a different approach to get the message through.